ToneAdapt

Loading...

Line 6 Catalyst 60 settings

Stairway to Heaven settings for Line 6 Catalyst 60

Led Zeppelin · adapted 2 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Line 6 Catalyst 60, select the Dynamic preset, then set Gain 6, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 1.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Squier Stratocaster · updated 2026-10-07

Preset / mode
Dynamic
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Line 6 Catalyst 60 knobs

Gain
6
Bass
5
Mid
6
Treble
7
Presence
6
Reverb
1.5
Boost
5
Noise gate
0
Power attenuation
3

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Focus on picking dynamics to achieve the articulate single notes characteristic of the solo.
  • Experiment with the boost to enhance sustain during the lead passages.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 Catalyst 60 actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Line 6 Catalyst 60 for Stairway to Heaven?

Start from the Dynamic preset, then set Gain 6, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 1.5.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a Squier Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 Catalyst 60

All 20 songs for the Line 6 Catalyst 60 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.