ToneAdapt

Loading...

Line 6 Spider III settings

Even Flow settings for Line 6 Spider III

Pearl Jam · adapted 4 times on ToneAdapt

To get the Pearl Jam "Even Flow" riff tone on a Line 6 Spider III, select the Crunch preset, then set Gain 6, Bass 5, Mid 6, Treble 6, Reverb 0.5, Boost 0. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Schecter Diamond Series C-1 Standard · updated 2026-10-06

Preset / mode
Crunch
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Line 6 Spider III knobs

Gain
6
Bass
5
Mid
6
Treble
6
Reverb
0.5
Boost
0
FX Knob 1
0
FX Knob 2
0
Noise Gate
1
Tap Delay Time
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in reverb set to a low level to recreate the slight ambiance of the original tone.
  • Focus on a tight, percussive attack while playing the riff to capture the dynamic feel.
  • Maintain a steady rhythm with aggressive strumming to emphasize the punchy nature of the riff.

The original rig

What Pearl Jam used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 Spider III actually has.

Guitar
Gibson Les Paul Standard (Stone Gossard, riff section)
Amp
Marshall JCM800 (cranked, studio recording)
Gain
6.5
Bass
6
Mid
7
Treble
6.5
Presence
6
Reverb
2
Full Even Flow tone breakdown, effects and sources →

Different guitar or pedals? Get Even Flow adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pearl Jam's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Line 6 Spider III for Even Flow?

Start from the Crunch preset, then set Gain 6, Bass 5, Mid 6, Treble 6, Reverb 0.5, Boost 0.

Which pickup should I use for Even Flow?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Pearl Jam use on Even Flow?

Guitar: Gibson Les Paul Standard (Stone Gossard, riff section). Amp: Marshall JCM800 (cranked, studio recording).

Will these settings work with my guitar?

These settings were adapted for a Schecter Diamond Series C-1 Standard. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 Spider III

All 45 songs for the Line 6 Spider III →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.