ToneAdapt

Loading...

M-Vave MK-300 settings

Rooster settings for M-Vave MK-300

Alice in Chains · adapted 2 times on ToneAdapt

To get the Alice in Chains "Rooster" riff tone on a M-Vave MK-300, use the Mars VM410 amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a PRS SE Custom 22 · updated 2026-09-06

Amp model
Mars VM410
Channel
Crunch
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
6
Master
7
Bass
6
Mid
7
Treble
7
Presence
5
Original drive
6

Effects chain

  1. 1overdriveBoostVolume 7 · Filter 5 · Distortion 6
  2. 2reverbRoomMix 2 · Decay 3
  3. 3compressionCompressLevel 6 · Ratio 4 · Attack 5 · Release 5
  4. 4noise gateNoise GateRelease 5

Playing tips

  • Use aggressive palm muting for tight chugging.
  • Focus on a percussive attack to enhance articulation.
  • Experiment with feedback to add sustain and depth.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your M-Vave MK-300 actually has.

Guitar
G&L Rampage (Jerry Cantrell's main guitar on Dirt album)
Amp
Bogner Fish preamp into VHT 2150 power amp (studio recording, Dirt era)
Gain
7
Bass
6
Mid
7
Treble
7
Presence
5.5
Reverb
2
Full Rooster tone breakdown, effects and sources →

Different guitar or pedals? Get Rooster adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the M-Vave MK-300 for Rooster?

Use the Mars VM410 (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 5, followed by Boost, Room, Compress, Noise Gate.

Which pickup should I use for Rooster?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Alice in Chains use on Rooster?

Guitar: G&L Rampage (Jerry Cantrell's main guitar on Dirt album). Amp: Bogner Fish preamp into VHT 2150 power amp (studio recording, Dirt era).

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 22. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the M-Vave MK-300

All 33 songs for the M-Vave MK-300 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.