ToneAdapt

Loading...

Marshall CODE50 settings

Alive settings for Marshall CODE50

Pearl Jam · adapted 2 times on ToneAdapt

To get the Pearl Jam "Alive" solo tone on a Marshall CODE50, select the JTM45 preset, then set Gain 1.5, Volume 7, Master 6, Bass 4, Mid 7, Treble 6. Use the neck + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Solo settings

Adapted for a Gibson SG · updated 2026-08-09

Preset / mode
JTM45
Pickup
Neck + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall CODE50 knobs

Gain
1.5
Volume
7
Master
6
Bass
4
Mid
7
Treble
6
Presence
4
Reverb
1.5

Built-in effects

  • Reverb on (spring) · 3

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Focus on dynamic picking to achieve the bright and articulate response characteristic of the original solo.
  • Maintain a clean tone with minimal breakup to ensure clarity in note separation.

The original rig

What Pearl Jam used on the recording, for reference. ToneAdapt translates this to the controls your Marshall CODE50 actually has.

Guitar
Fender Stratocaster (likely 1960s or '57 Reissue, Aged White, as seen in 1991-92 live footage)
Amp
Marshall 1960A 4x12 Cabinet with 65 Amps Empire 22-watt Tube Head and/or Satellite Atom 36-Watt Head (studio era, early 1990s)
Gain
6
Bass
6
Mid
7
Treble
6.5
Presence
6
Reverb
2.5
Full Alive tone breakdown, effects and sources →

Different guitar or pedals? Get Alive adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pearl Jam's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Marshall CODE50 for Alive?

Start from the JTM45 preset, then set Gain 1.5, Volume 7, Master 6, Bass 4, Mid 7, Treble 6.

Which pickup should I use for Alive?

Neck + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Pearl Jam use on Alive?

Guitar: Fender Stratocaster (likely 1960s or '57 Reissue, Aged White, as seen in 1991-92 live footage). Amp: Marshall 1960A 4x12 Cabinet with 65 Amps Empire 22-watt Tube Head and/or Satellite Atom 36-Watt Head (studio era, early 1990s).

Will these settings work with my guitar?

These settings were adapted for a Gibson SG. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall CODE50

All 16 songs for the Marshall CODE50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.