ToneAdapt

Loading...

Marshall DSL40CR settings

Stairway to Heaven settings for Marshall DSL40CR

Led Zeppelin · adapted 15 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Marshall DSL40CR, set Gain 6, Bass 5.5, Mid 5, Treble 7, Presence 6, Resonance 5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Shecter · updated 2026-11-05

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Marshall DSL40CR knobs

Gain
6
Bass
5.5
Mid
5
Treble
7
Presence
6
Resonance
5
Reverb
1.5
Tone shift
1
Output power
1

Built-in effects

  • Reverb on · 1.5

Playing tips

  • Use your amp's built-in reverb set to a low level to recreate the spacious feel of the original tone.
  • Focus on dynamic picking to achieve the articulate note separation characteristic of the original solo.
  • Experiment with your picking attack to enhance the biting attack and sustain of the notes.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL40CR actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL40CR settings for Stairway to Heaven?

Set Gain 6, Bass 5.5, Mid 5, Treble 7, Presence 6, Resonance 5.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a Shecter. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall DSL40CR

All 153 songs for the Marshall DSL40CR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.