ToneAdapt

Loading...

Marshall DSL5CR settings

Don't Cry settings for Marshall DSL5CR

Guns N' Roses · adapted 2 times on ToneAdapt

To get the Guns N' Roses "Don't Cry" riff tone on a Marshall DSL5CR, set Gain 6.5, Bass 5, Mid 6, Treble 6, Reverb 0, Deep 0. Use the bridge pickup with your guitar's tone on 7 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-08-18

Pickup
Bridge pickup
Guitar knobs
Tone 7 · Volume 8-9

Marshall DSL5CR knobs

Gain
6.5
Bass
5
Mid
6
Treble
6
Reverb
0
Deep
0
Low power
1
Tone shift
0

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Play with a light touch to maintain clarity and articulation in the riff.
  • Experiment with dynamics; the original tone is touch-sensitive, so adjust your picking strength.

Solo settings

Adapted for a Gibson Les Paul · updated 2026-03-28

Pickup
Neck pickup
Guitar knobs
Tone 10 · Volume 10

Marshall DSL5CR knobs

Gain
7.5
Bass
6
Mid
7
Treble
7
Reverb
1.5
Deep
0
Low power
1
Tone shift
0

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Incorporate a wah pedal for vocal-like phrasing during the solo.
  • Utilize a delay pedal to add depth and sustain to your solo lines.

The original rig

What Guns N' Roses used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL5CR actually has.

Guitar
Gibson Les Paul Standard (late 1980s, likely 1987-1989, as used by Slash in studio for Use Your Illusion sessions)
Amp
Marshall Silver Jubilee 2555 head with Marshall 4x12 cabinet (studio recording, 1990-1991)
Gain
7
Bass
6.5
Mid
6
Treble
5
Presence
6
Reverb
3.5
Full Don't Cry tone breakdown, effects and sources →

Different guitar or pedals? Get Don't Cry adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Guns N' Roses's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL5CR settings for Don't Cry?

Set Gain 6.5, Bass 5, Mid 6, Treble 6, Reverb 0, Deep 0.

Which pickup should I use for Don't Cry?

Bridge pickup, with the guitar's tone at 7 and volume at 8-9.

What gear did Guns N' Roses use on Don't Cry?

Guitar: Gibson Les Paul Standard (late 1980s, likely 1987-1989, as used by Slash in studio for Use Your Illusion sessions). Amp: Marshall Silver Jubilee 2555 head with Marshall 4x12 cabinet (studio recording, 1990-1991).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall DSL5CR

All 21 songs for the Marshall DSL5CR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.