ToneAdapt

Loading...

Marshall JCM800 settings

Gimme Three Steps settings for Marshall JCM800

Lynyrd Skynyrd · adapted 2 times on ToneAdapt

To get the Lynyrd Skynyrd "Gimme Three Steps" riff tone on a Marshall JCM800, set Gain 5.5, Bass 5, Mid 7, Treble 7, Presence 6. Use the bridge pickup with your guitar's tone on 5 and volume on 8-9.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-07-20

Pickup
Bridge pickup
Guitar knobs
Tone 5 · Volume 8-9

Marshall JCM800 knobs

Gain
5.5
Bass
5
Mid
7
Treble
7
Presence
6

Playing tips

  • Use a strong picking attack for a punchy, articulate sound.
  • Incorporate palm muting for added tightness on the lower strings.
  • Focus on maintaining a steady rhythm to capture the classic rock feel.

Solo settings

Adapted for a Epiphone Les Paul · updated 2026-07-20

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall JCM800 knobs

Gain
5.5
Bass
6
Mid
7
Treble
7
Presence
6

Built-in effects

  • Reverb off

Playing tips

  • Focus on picking dynamics to achieve touch sensitivity.
  • Use aggressive picking for a biting lead tone.
  • Incorporate slides and bends for expressive phrasing.

The original rig

What Lynyrd Skynyrd used on the recording, for reference. ToneAdapt translates this to the controls your Marshall JCM800 actually has.

Guitar
Gibson Les Paul (likely Standard, 1950s/60s spec, used by Allen Collins or Gary Rossington)
Amp
Marshall JTM45 (cranked, likely non-master volume, classic British rock amp of the era)
Gain
5.5
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
1
Full Gimme Three Steps tone breakdown, effects and sources →

Different guitar or pedals? Get Gimme Three Steps adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Lynyrd Skynyrd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall JCM800 settings for Gimme Three Steps?

Set Gain 5.5, Bass 5, Mid 7, Treble 7, Presence 6.

Which pickup should I use for Gimme Three Steps?

Bridge pickup, with the guitar's tone at 5 and volume at 8-9.

What gear did Lynyrd Skynyrd use on Gimme Three Steps?

Guitar: Gibson Les Paul (likely Standard, 1950s/60s spec, used by Allen Collins or Gary Rossington). Amp: Marshall JTM45 (cranked, likely non-master volume, classic British rock amp of the era).

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall JCM800

All 57 songs for the Marshall JCM800 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.