ToneAdapt

Loading...

Marshall Valvestate VS100 settings

Shock Me settings for Marshall Valvestate VS100

Kiss · adapted 2 times on ToneAdapt

To get the Kiss "Shock Me" solo tone on a Marshall Valvestate VS100, set Gain 8, Bass 5, Mid 6, Treble 7, Reverb 0, Fx mix 0. Use the bridge pickup with your guitar's tone on 7 and volume on 10.

Solo settings

Adapted for a Gibson Les Paul · updated 2026-05-08

Pickup
Bridge pickup
Guitar knobs
Tone 7 · Volume 10

Marshall Valvestate VS100 knobs

Gain
8
Bass
5
Mid
6
Treble
7
Reverb
0
Fx mix
0
Contour
6
Od reverb
0
Mid booster
1
Clean reverb
0
Power dimension
1

Playing tips

  • Use aggressive picking to achieve a spunky attack.
  • Focus on sustaining notes to capture the singing quality of the original tone.
  • Experiment with the volume knob to find the sweet spot for harmonics.

Riff settings

Adapted for a Gibson Les Paul · updated 2026-05-08

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 10

Marshall Valvestate VS100 knobs

Gain
8
Bass
5
Mid
7
Treble
7
Reverb
0
Fx mix
0
Contour
0
Od reverb
0
Mid booster
0
Clean reverb
0
Power dimension
1

Playing tips

  • Use a strong pick attack for clarity in chords.
  • Palm mute for tighter rhythms and to emphasize the punch.
  • Experiment with dynamic picking to enhance note separation.

The original rig

What Kiss used on the recording, for reference. ToneAdapt translates this to the controls your Marshall Valvestate VS100 actually has.

Guitar
Gibson Les Paul Standard (1970s, likely 1973 tobacco burst)
Amp
Marshall Super Lead 100 (Plexi, late 1960s/early 1970s, dimed)
Gain
8
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
1
Full Shock Me tone breakdown, effects and sources →

Different guitar or pedals? Get Shock Me adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Kiss's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall Valvestate VS100 settings for Shock Me?

Set Gain 8, Bass 5, Mid 6, Treble 7, Reverb 0, Fx mix 0.

Which pickup should I use for Shock Me?

Bridge pickup, with the guitar's tone at 7 and volume at 10.

What gear did Kiss use on Shock Me?

Guitar: Gibson Les Paul Standard (1970s, likely 1973 tobacco burst). Amp: Marshall Super Lead 100 (Plexi, late 1960s/early 1970s, dimed).

Will these settings work with my guitar?

These settings were adapted for a Gibson Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall Valvestate VS100

All 17 songs for the Marshall Valvestate VS100 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.