ToneAdapt

Loading...

NUX MG-30 settings

Back in Black settings for NUX MG-30

AC/DC · adapted 16 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a NUX MG-30, use the Plexi 100W amp model on the crunch channel, then set Drive 4, Master 7, Bass 4, Mid 7, Treble 5, Presence 6. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Ibanez GRG121DX-BKF · updated 2026-11-06

Amp model
Plexi 100W
Channel
Crunch
Cab
4x12 cabinet with Celestion speakers
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
4
Master
7
Bass
4
Mid
7
Treble
5
Presence
6

Effects chain

  1. 1overdriveT ScreamGain 3 · Tone 5 · Level 7
  2. 2reverbSpring ReverbMix 2 · Decay 3

Playing tips

  • Focus on a tight, percussive attack to capture the essence of the riff.
  • Use palm muting for added definition and punch in the rhythm.
  • Experiment with picking dynamics to achieve a clear, biting top end.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your NUX MG-30 actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the NUX MG-30 for Back in Black?

Use the Plexi 100W (crunch channel) with Drive 4, Master 7, Bass 4, Mid 7, Treble 5, Presence 6, followed by T Scream, Spring Reverb.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Ibanez GRG121DX-BKF. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the NUX MG-30

All 54 songs for the NUX MG-30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.