ToneAdapt

Loading...

NUX MG-30 settings

Holy Wars settings for NUX MG-30

Megadeth · adapted 20 times on ToneAdapt

To get the Megadeth "Holy Wars" riff tone on a NUX MG-30, use the Brit 800 amp model on the lead channel, then set Drive 8, Master 7, Bass 5, Mid 4, Treble 7, Presence 6. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Squier Stratocaster · updated 2026-11-05

Amp model
Brit 800
Channel
Lead
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
8
Master
7
Bass
5
Mid
4
Treble
7
Presence
6
Original drive
8

Effects chain

  1. 1distortionDist OneGain 8 · Tone 6 · Level 7
  2. 2noise gateNoise GateRelease 3 · Threshold 5
  3. 3overdriveRC BoostGain 4 · Bass 5 · Treble 5 · Level 8

Playing tips

  • Focus on tight palm muting to achieve a percussive attack.
  • Use aggressive pick attack for sharp articulation.
  • Maintain a fast, staccato playing style for the riff.

The original rig

What Megadeth used on the recording, for reference. ToneAdapt translates this to the controls your NUX MG-30 actually has.

Guitar
Jackson KV Pro Dave Mustaine Signature (likely with Bill Lawrence L-500XL bridge pickup)
Amp
Marshall JCM800 2203 head into DeCuir 4x12 cabinet with Celestion speakers
Gain
7.5
Bass
5
Mid
5.5
Treble
7
Presence
6.5
Reverb
0
Full Holy Wars tone breakdown, effects and sources →

Different guitar or pedals? Get Holy Wars adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Megadeth's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the NUX MG-30 for Holy Wars?

Use the Brit 800 (lead channel) with Drive 8, Master 7, Bass 5, Mid 4, Treble 7, Presence 6, followed by Dist One, Noise Gate, RC Boost.

Which pickup should I use for Holy Wars?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Megadeth use on Holy Wars?

Guitar: Jackson KV Pro Dave Mustaine Signature (likely with Bill Lawrence L-500XL bridge pickup). Amp: Marshall JCM800 2203 head into DeCuir 4x12 cabinet with Celestion speakers.

Will these settings work with my guitar?

These settings were adapted for a Squier Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the NUX MG-30

All 54 songs for the NUX MG-30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.