ToneAdapt

Loading...

NUX Mighty 40 BT settings

Stairway to Heaven settings for NUX Mighty 40 BT

Led Zeppelin · adapted 2 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a NUX Mighty 40 BT, select the Overdrive B preset, then set Gain 6, Master 5, Bass 5, Mid 6, Treble 7, Reverb 1.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Fender Stratocaster · updated 2026-09-20

Preset / mode
Overdrive B
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

NUX Mighty 40 BT knobs

Gain
6
Master
5
Bass
5
Mid
6
Treble
7
Reverb
1.5
Type
0
Level
5
Fx param
5
Tap tempo
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in reverb set to a low level for a spacious feel.
  • Focus on picking dynamics to achieve the articulate single notes characteristic of the solo.
  • Experiment with your picking attack to enhance the treble-forward, biting tone.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your NUX Mighty 40 BT actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the NUX Mighty 40 BT for Stairway to Heaven?

Start from the Overdrive B preset, then set Gain 6, Master 5, Bass 5, Mid 6, Treble 7, Reverb 1.5.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the NUX Mighty 40 BT

All 17 songs for the NUX Mighty 40 BT →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.