ToneAdapt

Loading...

Positive Grid Spark GO settings

Stairway to Heaven settings for Positive Grid Spark GO

Led Zeppelin · adapted 4 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Positive Grid Spark GO, select the Rockerverb preset, then set Gain 6, Bass 5, Mid 6, Treble 7, Reverb 1.5, Music volume 7. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

updated 2026-10-12

Preset / mode
Rockerverb
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Positive Grid Spark GO knobs

Gain
6
Bass
5
Mid
6
Treble
7
Reverb
1.5
Music volume
7

Built-in effects

  • Reverb on (Spring) · 1.5

Playing tips

  • Use your amp's built-in reverb set to a low level to add depth to your solo.
  • Focus on dynamic picking to achieve the articulate single notes characteristic of the original tone.
  • Experiment with your picking attack to enhance the treble-forward, biting attack of your notes.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark GO actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Positive Grid Spark GO for Stairway to Heaven?

Start from the Rockerverb preset, then set Gain 6, Bass 5, Mid 6, Treble 7, Reverb 1.5, Music volume 7.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark GO

All 39 songs for the Positive Grid Spark GO →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.