ToneAdapt

Loading...

Valeton GP-200 settings

Man in the Box settings for Valeton GP-200

Alice in Chains · adapted 7 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Valeton GP-200, use the UK 800 (Marshall JCM800) amp model on the lead channel, then set Drive 8, Master 7, Bass 6, Mid 6, Treble 7, Presence 6. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-10-14

Amp model
UK 800 (Marshall JCM800)
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
8
Master
7
Bass
6
Mid
6
Treble
7
Presence
6

Effects chain

  1. 1noise gateNR Gate (Decimator Noise Reduction)Release 5 · Threshold 5
  2. 2distortionRAT (ProCo RAT)Volume 7 · Filter 5 · Distortion 7
  3. 3boostB-Boost (Xotic BB Preamp)Gain 5 · Bass 5 · Treble 5 · Level 7

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive picking to achieve a percussive attack.
  • Maintain a steady rhythm to enhance the crushing intensity of the riffs.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-200 actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Valeton GP-200 for Man in the Box?

Use the UK 800 (Marshall JCM800) (lead channel) with Drive 8, Master 7, Bass 6, Mid 6, Treble 7, Presence 6, followed by NR Gate (Decimator Noise Reduction), RAT (ProCo RAT), B-Boost (Xotic BB Preamp).

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Valeton GP-200

All 43 songs for the Valeton GP-200 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.