ToneAdapt

Loading...

Valeton GP-5 settings

Highway to Hell settings for Valeton GP-5

AC/DC · adapted 6 times on ToneAdapt

To get the AC/DC "Highway to Hell" riff tone on a Valeton GP-5, use the Plexi 50w amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 6.5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-11-01

Amp model
Plexi 50w
Channel
Crunch
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
6
Master
7
Bass
6
Mid
7
Treble
7
Presence
6.5

Effects chain

  1. 1overdriveGreen ODGain 5 · Tone 6 · Level 7
  2. 2reverbSpringMix 4 · Decay 3
  3. 3delayAnalog DelayMix 4 · Feedback 3

Playing tips

  • Focus on a strong, aggressive picking attack to capture the raw energy of the riff.
  • Use palm muting on the lower strings for a tighter, punchy sound.
  • Keep your strumming hand relaxed to maintain fluidity while playing the riff.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-5 actually has.

Guitar
Gibson SG Standard (late 1960s, likely 1968-1970, stock humbuckers)
Amp
Marshall Super Lead 1959 100-watt (plexi, late 1960s/early 1970s, no master volume)
Gain
6
Bass
6
Mid
7
Treble
7
Presence
6.5
Reverb
0
Full Highway to Hell tone breakdown, effects and sources →

Different guitar or pedals? Get Highway to Hell adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Valeton GP-5 for Highway to Hell?

Use the Plexi 50w (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 6.5, followed by Green OD, Spring, Analog Delay.

Which pickup should I use for Highway to Hell?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Highway to Hell?

Guitar: Gibson SG Standard (late 1960s, likely 1968-1970, stock humbuckers). Amp: Marshall Super Lead 1959 100-watt (plexi, late 1960s/early 1970s, no master volume).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Valeton GP-5

All 17 songs for the Valeton GP-5 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.