ToneAdapt

Loading...

Valeton GP-5 settings

Master of Puppets settings for Valeton GP-5

Metallica · adapted 7 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a Valeton GP-5, use the Marshall JCM800 2203 amp model on the lead channel, then set Drive 8, Master 7, Bass 6, Mid 2, Treble 8, Presence 6. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Squier Stratocaster · updated 2026-11-05

Amp model
Marshall JCM800 2203
Channel
Lead
Cab
4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
8
Master
7
Bass
6
Mid
2
Treble
8
Presence
6
Original drive
8

Effects chain

  1. 1overdriveGreen ODGain 7 · Tone 5 · Level 8
  2. 2noise gateGateRelease 3 · Threshold 5
  3. 3distortionHeavy MetalGain 8 · Tone 6 · Level 7

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use fast alternate picking to achieve a percussive rhythm.
  • Maintain a strong attack to ensure articulation in your notes.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-5 actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Valeton GP-5 for Master of Puppets?

Use the Marshall JCM800 2203 (lead channel) with Drive 8, Master 7, Bass 6, Mid 2, Treble 8, Presence 6, followed by Green OD, Gate, Heavy Metal.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Squier Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Valeton GP-5

All 17 songs for the Valeton GP-5 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.