ToneAdapt

Loading...

Valeton GP-50 settings

Highway to Hell settings for Valeton GP-50

AC/DC · adapted 3 times on ToneAdapt

To get the AC/DC "Highway to Hell" riff tone on a Valeton GP-50, use the UK 2000 (Marshall® JCM2000) amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 6.5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-10-30

Amp model
UK 2000 (Marshall® JCM2000)
Channel
Crunch
Cab
4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
6
Master
7
Bass
6
Mid
7
Treble
7
Presence
6.5

Effects chain

  1. 1overdriveGreen ODGain 5 · Tone 6 · Level 7
  2. 2reverbSpringMix 3 · Decay 4

Playing tips

  • Use a strong picking attack to emphasize the crunch and clarity of the riff.
  • Maintain a consistent rhythm to capture the driving energy of the original tone.
  • Experiment with palm muting on the lower strings for added punch.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-50 actually has.

Guitar
Gibson SG Standard (late 1960s, likely 1968-1970, stock humbuckers)
Amp
Marshall Super Lead 1959 100-watt (plexi, late 1960s/early 1970s, no master volume)
Gain
6
Bass
6
Mid
7
Treble
7
Presence
6.5
Reverb
0
Full Highway to Hell tone breakdown, effects and sources →

Different guitar or pedals? Get Highway to Hell adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Valeton GP-50 for Highway to Hell?

Use the UK 2000 (Marshall® JCM2000) (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 6.5, followed by Green OD, Spring.

Which pickup should I use for Highway to Hell?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Highway to Hell?

Guitar: Gibson SG Standard (late 1960s, likely 1968-1970, stock humbuckers). Amp: Marshall Super Lead 1959 100-watt (plexi, late 1960s/early 1970s, no master volume).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Valeton GP-50

All 17 songs for the Valeton GP-50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.