ToneAdapt

Loading...

Valeton GP-50 settings

Smoke on the Water settings for Valeton GP-50

Deep Purple · adapted 2 times on ToneAdapt

To get the Deep Purple "Smoke on the Water" riff tone on a Valeton GP-50, use the UK 2000 (Marshall® JCM2000) amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 6.5. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-10-15

Amp model
UK 2000 (Marshall® JCM2000)
Channel
Crunch
Cab
4x12 cabinet
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
6
Master
7
Bass
6
Mid
7
Treble
7
Presence
6.5

Effects chain

  1. 1overdriveGreen ODGain 5 · Level 8
  2. 2reverbSpringMix 2 · Decay 3

Playing tips

  • Use a strong picking attack for a punchy sound.
  • Palm mute the lower strings for a tighter, percussive effect.
  • Experiment with dynamics; play softer for cleaner notes and harder for crunch.

The original rig

What Deep Purple used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-50 actually has.

Guitar
1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups)
Amp
Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version)
Gain
6
Bass
6
Mid
7
Treble
7
Presence
6.5
Reverb
0.5
Full Smoke on the Water tone breakdown, effects and sources →

Different guitar or pedals? Get Smoke on the Water adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Deep Purple's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Valeton GP-50 for Smoke on the Water?

Use the UK 2000 (Marshall® JCM2000) (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 7, Presence 6.5, followed by Green OD, Spring.

Which pickup should I use for Smoke on the Water?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Deep Purple use on Smoke on the Water?

Guitar: 1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups). Amp: Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Valeton GP-50

All 17 songs for the Valeton GP-50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.