ToneAdapt

Loading...

Logic Pro X Amp Designer settings

Lateralus settings for Logic Pro X Amp Designer

TOOL · adapted 3 times on ToneAdapt

To get the TOOL "Lateralus" riff tone on a Logic Pro X Amp Designer, select the Vintage British Stack preset, then set Gain 7, Bass 6, Mid 6.5, Treble 6, Presence 6, Reverb 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone SG Standard · updated 2026-06-03

Preset / mode
Vintage British Stack
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Logic Pro X Amp Designer knobs

Gain
7
Bass
6
Mid
6.5
Treble
6
Presence
6
Reverb
1
Tremolo speed
0
Vibrato speed
0
Tremolo intensity
0
Vibrato intensity
0

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in reverb set to a low level to recreate the spacious feel of the original tone.
  • Maintain a strong picking attack to emphasize the crunch and articulation in the riff.
  • Experiment with palm muting during the riff to add dynamic contrast.

The original rig

What TOOL used on the recording, for reference. ToneAdapt translates this to the controls your Logic Pro X Amp Designer actually has.

Guitar
1979 Gibson Les Paul Custom Silverburst
Amp
Diezel VH4 (Channel 3, studio recording)
Gain
7
Bass
6
Mid
6.5
Treble
6
Presence
6
Reverb
1
Full Lateralus tone breakdown, effects and sources →

Different guitar or pedals? Get Lateralus adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts TOOL's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Logic Pro X Amp Designer for Lateralus?

Start from the Vintage British Stack preset, then set Gain 7, Bass 6, Mid 6.5, Treble 6, Presence 6, Reverb 1.

Which pickup should I use for Lateralus?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did TOOL use on Lateralus?

Guitar: 1979 Gibson Les Paul Custom Silverburst. Amp: Diezel VH4 (Channel 3, studio recording).

Will these settings work with my guitar?

These settings were adapted for a Epiphone SG Standard. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Logic Pro X Amp Designer

All 20 songs for the Logic Pro X Amp Designer →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.