ToneAdapt

Loading...

Logic Pro X Amp Designer settings

Walk settings for Logic Pro X Amp Designer

Pantera · adapted 2 times on ToneAdapt

To get the Pantera "Walk" riff tone on a Logic Pro X Amp Designer, select the High Octane Stack preset, then set Gain 8.5, Bass 6, Mid 2, Treble 7.5, Presence 6, Reverb 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Ibanez JEMJR · updated 2026-07-24

Preset / mode
High Octane Stack
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Logic Pro X Amp Designer knobs

Gain
8.5
Bass
6
Mid
2
Treble
7.5
Presence
6
Reverb
0
Tremolo speed
0
Vibrato speed
0
Tremolo intensity
0
Vibrato intensity
0

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use a sharp pick attack to emphasize each note.
  • Keep your picking hand close to the bridge for a tighter sound.

The original rig

What Pantera used on the recording, for reference. ToneAdapt translates this to the controls your Logic Pro X Amp Designer actually has.

Guitar
Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power)
Amp
Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers)
Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Presence
7
Reverb
0
Full Walk tone breakdown, effects and sources →

Different guitar or pedals? Get Walk adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pantera's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Logic Pro X Amp Designer for Walk?

Start from the High Octane Stack preset, then set Gain 8.5, Bass 6, Mid 2, Treble 7.5, Presence 6, Reverb 0.

Which pickup should I use for Walk?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pantera use on Walk?

Guitar: Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power). Amp: Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers).

Will these settings work with my guitar?

These settings were adapted for a Ibanez JEMJR. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Logic Pro X Amp Designer

All 20 songs for the Logic Pro X Amp Designer →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.