ToneAdapt

Loading...

Logic Pro X Amp Designer settings

Paranoid Android settings for Logic Pro X Amp Designer

Radiohead · adapted 3 times on ToneAdapt

To get the Radiohead "Paranoid Android" riff tone on a Logic Pro X Amp Designer, select the Vintage British Stack preset, then set Gain 7, Bass 5, Mid 7, Treble 6, Presence 6, Reverb 0.5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-08-20

Preset / mode
Vintage British Stack
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Logic Pro X Amp Designer knobs

Gain
7
Bass
5
Mid
7
Treble
6
Presence
6
Reverb
0.5
Tremolo speed
0
Vibrato speed
0
Tremolo intensity
0
Vibrato intensity
0

Built-in effects

  • Reverb on (spring) · 3

Playing tips

  • Use your amp's built-in reverb set to a moderate level for added depth.
  • Pick with a dynamic attack to enhance the percussive quality of the riff.
  • Experiment with the tremolo speed and intensity to add a swirling effect to the tone.

The original rig

What Radiohead used on the recording, for reference. ToneAdapt translates this to the controls your Logic Pro X Amp Designer actually has.

Guitar
Fender Telecaster Plus
Amp
Vox AC30 (studio, likely with Marshall Shredmaster pedal for distortion)
Gain
7
Bass
6
Mid
7
Treble
7
Presence
5.5
Reverb
2
Full Paranoid Android tone breakdown, effects and sources →

Different guitar or pedals? Get Paranoid Android adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Radiohead's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Logic Pro X Amp Designer for Paranoid Android?

Start from the Vintage British Stack preset, then set Gain 7, Bass 5, Mid 7, Treble 6, Presence 6, Reverb 0.5.

Which pickup should I use for Paranoid Android?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Radiohead use on Paranoid Android?

Guitar: Fender Telecaster Plus. Amp: Vox AC30 (studio, likely with Marshall Shredmaster pedal for distortion).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Logic Pro X Amp Designer

All 20 songs for the Logic Pro X Amp Designer →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.