ToneAdapt

Loading...

Marshall CODE 25 settings

Eruption settings for Marshall CODE 25

Van Halen · adapted 3 times on ToneAdapt

To get the Van Halen "Eruption" solo tone on a Marshall CODE 25, set Gain 8.5, Volume 7, Master 5, Bass 5, Mid 6, Treble 7. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Epiphone Les Paul · updated 2026-11-12

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Marshall CODE 25 knobs

Gain
8.5
Volume
7
Master
5
Bass
5
Mid
6
Treble
7

Built-in effects

  • Delay on (Vintage) · 3
  • Cabinet on (1960AX (4x12, G12M-25 Greenback))
  • Power amp on (Classic Marshall 100W (EL34))
  • Noise gate on

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Focus on aggressive alternate picking to achieve a tight, percussive attack.
  • Incorporate tapping techniques for explosive harmonics and fluid legato runs.

The original rig

What Van Halen used on the recording, for reference. ToneAdapt translates this to the controls your Marshall CODE 25 actually has.

Guitar
Frankenstrat (homemade, Boogie Bodies Strat-style ash body, bird’s eye maple neck, vintage Strat tremolo, single Gibson PAF humbucker in bridge)
Amp
Marshall Super Lead 1959 100-watt 'Plexi' (run through Variac at ~90V, Marshall 1960A 4x12 cab, Celestion G12M speakers)
Gain
8.5
Bass
5.5
Mid
6.5
Treble
7
Presence
6
Reverb
0.5
Full Eruption tone breakdown, effects and sources →

Different guitar or pedals? Get Eruption adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Van Halen's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall CODE 25 settings for Eruption?

Set Gain 8.5, Volume 7, Master 5, Bass 5, Mid 6, Treble 7.

Which pickup should I use for Eruption?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Van Halen use on Eruption?

Guitar: Frankenstrat (homemade, Boogie Bodies Strat-style ash body, bird’s eye maple neck, vintage Strat tremolo, single Gibson PAF humbucker in bridge). Amp: Marshall Super Lead 1959 100-watt 'Plexi' (run through Variac at ~90V, Marshall 1960A 4x12 cab, Celestion G12M speakers).

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall CODE 25

All 95 songs for the Marshall CODE 25 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.