ToneAdapt

Loading...

Boss Katana 50 Gen 3 settings

Eruption settings for Boss Katana 50 Gen 3

Van Halen · adapted 5 times on ToneAdapt

To get the Van Halen "Eruption" solo tone on a Boss Katana 50 Gen 3, set Gain 8.5, Bass 5, Mid 6, Treble 7, Reverb 0, Fx 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Squier Telecaster · updated 2026-11-10

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Boss Katana 50 Gen 3 knobs

Gain
8.5
Bass
5
Mid
6
Treble
7
Reverb
0
Fx
0
Bst
6
Variation
0
Power control
2

Built-in effects

  • Delay on

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the booster section to add extra gain and sustain for your solos.
  • Keep your power control at maximum for full headroom and responsiveness.

The original rig

What Van Halen used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 50 Gen 3 actually has.

Guitar
Frankenstrat (homemade, Boogie Bodies Strat-style ash body, bird’s eye maple neck, vintage Strat tremolo, single Gibson PAF humbucker in bridge)
Amp
Marshall Super Lead 1959 100-watt 'Plexi' (run through Variac at ~90V, Marshall 1960A 4x12 cab, Celestion G12M speakers)
Gain
8.5
Bass
5.5
Mid
6.5
Treble
7
Presence
6
Reverb
0.5
Full Eruption tone breakdown, effects and sources →

Different guitar or pedals? Get Eruption adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Van Halen's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 50 Gen 3 settings for Eruption?

Set Gain 8.5, Bass 5, Mid 6, Treble 7, Reverb 0, Fx 0.

Which pickup should I use for Eruption?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Van Halen use on Eruption?

Guitar: Frankenstrat (homemade, Boogie Bodies Strat-style ash body, bird’s eye maple neck, vintage Strat tremolo, single Gibson PAF humbucker in bridge). Amp: Marshall Super Lead 1959 100-watt 'Plexi' (run through Variac at ~90V, Marshall 1960A 4x12 cab, Celestion G12M speakers).

Will these settings work with my guitar?

These settings were adapted for a Squier Telecaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 50 Gen 3

All 141 songs for the Boss Katana 50 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.