ToneAdapt

Loading...

Marshall DSL40CR settings

Eruption settings for Marshall DSL40CR

Van Halen · adapted 2 times on ToneAdapt

To get the Van Halen "Eruption" solo tone on a Marshall DSL40CR, set Gain 8.5, Bass 5, Mid 7, Treble 7, Presence 6, Resonance 6. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a ESP LTD EC-1000 · updated 2026-04-15

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Marshall DSL40CR knobs

Gain
8.5
Bass
5
Mid
7
Treble
7
Presence
6
Resonance
6
Reverb
0
Tone shift
0
Fx loop switch
0
Power settings
1
Master volume 1
7
Master volume 2
0
Master select switch
1

Playing tips

  • Use aggressive pick attack for dynamic response.
  • Incorporate palm muting for percussive effects.
  • Focus on legato runs for fluidity in solos.

The original rig

What Van Halen used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL40CR actually has.

Guitar
Frankenstrat (homemade, Boogie Bodies Strat-style ash body, bird’s eye maple neck, vintage Strat tremolo, single Gibson PAF humbucker in bridge)
Amp
Marshall Super Lead 1959 100-watt 'Plexi' (run through Variac at ~90V, Marshall 1960A 4x12 cab, Celestion G12M speakers)
Gain
8.5
Bass
5.5
Mid
6.5
Treble
7
Presence
6
Reverb
0.5
Full Eruption tone breakdown, effects and sources →

Different guitar or pedals? Get Eruption adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Van Halen's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL40CR settings for Eruption?

Set Gain 8.5, Bass 5, Mid 7, Treble 7, Presence 6, Resonance 6.

Which pickup should I use for Eruption?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Van Halen use on Eruption?

Guitar: Frankenstrat (homemade, Boogie Bodies Strat-style ash body, bird’s eye maple neck, vintage Strat tremolo, single Gibson PAF humbucker in bridge). Amp: Marshall Super Lead 1959 100-watt 'Plexi' (run through Variac at ~90V, Marshall 1960A 4x12 cab, Celestion G12M speakers).

Will these settings work with my guitar?

These settings were adapted for a ESP LTD EC-1000. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall DSL40CR

All 153 songs for the Marshall DSL40CR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.