ToneAdapt

Loading...

Valeton GP-50 settings

Pride and Joy settings for Valeton GP-50

Stevie Ray Vaughan · adapted 2 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Valeton GP-50, use the Dark Twin (Fender '65 Twin Reverb) amp model on the clean channel, then set Drive 4, Master 7, Bass 7, Mid 7, Treble 6, Presence 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Telecaster · updated 2026-10-16

Amp model
Dark Twin (Fender '65 Twin Reverb)
Channel
Clean
Cab
2x12 open back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
4
Master
7
Bass
7
Mid
7
Treble
6
Presence
5

Effects chain

  1. 1overdriveGreen ODGain 3.5 · Tone 5 · Level 8
  2. 2compressionCompLevel 5 · Sustain 5
  3. 3reverbSpringMix 5 · Decay 3

Playing tips

  • Use a percussive attack to emphasize the Texas shuffle feel.
  • Focus on dynamic playing to capture the touch-sensitive response.
  • Experiment with fingerstyle for a warmer tone.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-50 actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Valeton GP-50 for Pride and Joy?

Use the Dark Twin (Fender '65 Twin Reverb) (clean channel) with Drive 4, Master 7, Bass 7, Mid 7, Treble 6, Presence 5, followed by Green OD, Comp, Spring.

Which pickup should I use for Pride and Joy?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Fender Telecaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Valeton GP-50

All 17 songs for the Valeton GP-50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.