ToneAdapt

Loading...

Fender Mustang LT50 settings

Wanted Dead or Alive settings for Fender Mustang LT50

Bon Jovi · adapted 2 times on ToneAdapt

To get the Bon Jovi "Wanted Dead or Alive" riff tone on a Fender Mustang LT50, select the CLASSIC ROCK preset, then set Gain 5.5, Bass 5, Mid 6, Treble 6, Reverb 0.5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-08-26

Preset / mode
CLASSIC ROCK
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Fender Mustang LT50 knobs

Gain
5.5
Bass
5
Mid
6
Treble
6
Reverb
0.5

Built-in effects

  • Reverb on (spring) · 3

Playing tips

  • Use a strong pick attack to emphasize the articulate note separation.
  • Palm mute the lower strings during the riff for a tighter sound.
  • Experiment with your volume knob to find the sweet spot for crunch without losing clarity.

The original rig

What Bon Jovi used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang LT50 actually has.

Guitar
Gibson Les Paul Standard (late '50s/early '60s, likely 1959 or 1960, as referenced in interviews and rig rundowns for the era)
Amp
Marshall JCM 800 head (studio recording, 1986)
Gain
7
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
3
Full Wanted Dead or Alive tone breakdown, effects and sources →

Different guitar or pedals? Get Wanted Dead or Alive adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Bon Jovi's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang LT50 for Wanted Dead or Alive?

Start from the CLASSIC ROCK preset, then set Gain 5.5, Bass 5, Mid 6, Treble 6, Reverb 0.5.

Which pickup should I use for Wanted Dead or Alive?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Bon Jovi use on Wanted Dead or Alive?

Guitar: Gibson Les Paul Standard (late '50s/early '60s, likely 1959 or 1960, as referenced in interviews and rig rundowns for the era). Amp: Marshall JCM 800 head (studio recording, 1986).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang LT50

All 116 songs for the Fender Mustang LT50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.