ToneAdapt

Loading...

Marshall DSL40CR settings

Wanted Dead or Alive settings for Marshall DSL40CR

Bon Jovi · adapted 4 times on ToneAdapt

To get the Bon Jovi "Wanted Dead or Alive" riff tone on a Marshall DSL40CR, set Gain 0, Bass 5, Mid 6, Treble 6, Presence 4, Resonance 4. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Gibson SG Standard Gold Series Limited Edition · updated 2026-07-01

Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall DSL40CR knobs

Gain
0
Bass
5
Mid
6
Treble
6
Presence
4
Resonance
4
Reverb
5
Tone shift
0

Built-in effects

  • Reverb on (plate) · 6

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Strum with a percussive attack to capture the crispness of the original 12-string sound.
  • Consider using fingerstyle for a more dynamic and articulate tone.

The original rig

What Bon Jovi used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL40CR actually has.

Guitar
Gibson Les Paul Standard (late '50s/early '60s, likely 1959 or 1960, as referenced in interviews and rig rundowns for the era)
Amp
Marshall JCM 800 head (studio recording, 1986)
Gain
7
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
3
Full Wanted Dead or Alive tone breakdown, effects and sources →

Different guitar or pedals? Get Wanted Dead or Alive adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Bon Jovi's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL40CR settings for Wanted Dead or Alive?

Set Gain 0, Bass 5, Mid 6, Treble 6, Presence 4, Resonance 4.

Which pickup should I use for Wanted Dead or Alive?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Bon Jovi use on Wanted Dead or Alive?

Guitar: Gibson Les Paul Standard (late '50s/early '60s, likely 1959 or 1960, as referenced in interviews and rig rundowns for the era). Amp: Marshall JCM 800 head (studio recording, 1986).

Will these settings work with my guitar?

These settings were adapted for a Gibson SG Standard Gold Series Limited Edition. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall DSL40CR

All 153 songs for the Marshall DSL40CR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.