ToneAdapt

Loading...

Logic Pro X Amp Designer settings

I Lied, Amber settings for Logic Pro X Amp Designer

Keo · adapted 2 times on ToneAdapt

To get the Keo "I Lied, Amber" riff tone on a Logic Pro X Amp Designer, select the Modern British Stack preset, then set Gain 6, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Telecaster · updated 2026-06-15

Preset / mode
Modern British Stack
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Logic Pro X Amp Designer knobs

Gain
6
Bass
5
Mid
6
Treble
7
Presence
6
Reverb
1
Tremolo speed
3
Vibrato speed
0
Tremolo intensity
4
Vibrato intensity
0

Built-in effects

  • Reverb on (spring) · 4

Playing tips

  • Use dynamic strumming to enhance the riff's articulation.
  • Incorporate slight palm muting for added punch without losing clarity.
  • Adjust your picking attack for a gritty sound without excessive gain.

The original rig

What Keo used on the recording, for reference. ToneAdapt translates this to the controls your Logic Pro X Amp Designer actually has.

Guitar
Unknown (likely a standard solidbody electric, model not specified)
Amp
Unknown (no amp model specified in sources)
Gain
6
Bass
6
Mid
6
Treble
7
Presence
6
Reverb
3
Full I Lied, Amber tone breakdown, effects and sources →

Different guitar or pedals? Get I Lied, Amber adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Keo's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Logic Pro X Amp Designer for I Lied, Amber?

Start from the Modern British Stack preset, then set Gain 6, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 1.

Which pickup should I use for I Lied, Amber?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Keo use on I Lied, Amber?

Guitar: Unknown (likely a standard solidbody electric, model not specified). Amp: Unknown (no amp model specified in sources).

Will these settings work with my guitar?

These settings were adapted for a Fender Telecaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Logic Pro X Amp Designer

All 20 songs for the Logic Pro X Amp Designer →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.