ToneAdapt

Loading...

Logic Pro X Amp Designer settings

Smoke on the Water settings for Logic Pro X Amp Designer

Deep Purple · adapted 2 times on ToneAdapt

To get the Deep Purple "Smoke on the Water" riff tone on a Logic Pro X Amp Designer, select the Vintage British Stack preset, then set Gain 6, Bass 5, Mid 7, Treble 7, Presence 6, Reverb 0. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Ibanez AZES40 · updated 2026-11-12

Preset / mode
Vintage British Stack
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Logic Pro X Amp Designer knobs

Gain
6
Bass
5
Mid
7
Treble
7
Presence
6
Reverb
0
Tremolo speed
0
Vibrato speed
0
Tremolo intensity
0
Vibrato intensity
0

Playing tips

  • Focus on palm muting for a tight, percussive attack.
  • Use fingerstyle for added dynamics and touch sensitivity.
  • Experiment with picking harder for more articulation in the riff.

The original rig

What Deep Purple used on the recording, for reference. ToneAdapt translates this to the controls your Logic Pro X Amp Designer actually has.

Guitar
1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups)
Amp
Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version)
Gain
6
Bass
6
Mid
7
Treble
7
Presence
6.5
Reverb
0.5
Full Smoke on the Water tone breakdown, effects and sources →

Different guitar or pedals? Get Smoke on the Water adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Deep Purple's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Logic Pro X Amp Designer for Smoke on the Water?

Start from the Vintage British Stack preset, then set Gain 6, Bass 5, Mid 7, Treble 7, Presence 6, Reverb 0.

Which pickup should I use for Smoke on the Water?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Deep Purple use on Smoke on the Water?

Guitar: 1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups). Amp: Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version).

Will these settings work with my guitar?

These settings were adapted for a Ibanez AZES40. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Logic Pro X Amp Designer

All 20 songs for the Logic Pro X Amp Designer →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.