ToneAdapt

Loading...

Roland Cube 30 settings

Back in Black settings for Roland Cube 30

AC/DC · adapted 3 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a Roland Cube 30, select the BRIT COMBO preset, then set Gain 4, Bass 5, Mid 6, Treble 6, Reverb 0, Lead gain 5. Use the bridge pickup with your guitar's tone on 7 and volume on 8-9.

Riff settings

updated 2026-11-13

Preset / mode
BRIT COMBO
Pickup
Bridge pickup
Guitar knobs
Tone 7 · Volume 8-9

Roland Cube 30 knobs

Gain
4
Bass
5
Mid
6
Treble
6
Reverb
0
Lead gain
5
Lead volume
6
Clean volume
0

Playing tips

  • Use a strong palm muting technique for tight, percussive attack.
  • Dig in with your pick for a more aggressive sound.
  • Focus on dynamic playing to maintain touch sensitivity.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 30 actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Roland Cube 30 for Back in Black?

Start from the BRIT COMBO preset, then set Gain 4, Bass 5, Mid 6, Treble 6, Reverb 0, Lead gain 5.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 30

All 13 songs for the Roland Cube 30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.