ToneAdapt

Loading...

Roland Cube 30 settings

Raining Blood settings for Roland Cube 30

Slayer · adapted 4 times on ToneAdapt

To get the Slayer "Raining Blood" riff tone on a Roland Cube 30, select the METAL STACK preset, then set Gain 8.5, Bass 5, Mid 6.5, Treble 7, Lead gain 8, Lead volume 7. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Yamaha EG 112C · updated 2026-11-08

Preset / mode
METAL STACK
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Roland Cube 30 knobs

Gain
8.5
Bass
5
Mid
6.5
Treble
7
Lead gain
8
Lead volume
7
Delay reverb
0
Efx selector
0
Select switch
1
Jc clean volume
5
Lead type switch
5

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack to enhance articulation.
  • Maintain a staccato feel in your playing for the riff.

The original rig

What Slayer used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 30 actually has.

Guitar
B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era)
Amp
Marshall JCM800 2203
Gain
8.5
Bass
5
Mid
5.5
Treble
7
Presence
7
Reverb
0
Full Raining Blood tone breakdown, effects and sources →

Different guitar or pedals? Get Raining Blood adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Slayer's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Roland Cube 30 for Raining Blood?

Start from the METAL STACK preset, then set Gain 8.5, Bass 5, Mid 6.5, Treble 7, Lead gain 8, Lead volume 7.

Which pickup should I use for Raining Blood?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Slayer use on Raining Blood?

Guitar: B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era). Amp: Marshall JCM800 2203.

Will these settings work with my guitar?

These settings were adapted for a Yamaha EG 112C. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 30

All 13 songs for the Roland Cube 30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.