ToneAdapt

Loading...

Roland Cube 30 settings

Smoke on the Water settings for Roland Cube 30

Deep Purple · adapted 2 times on ToneAdapt

To get the Deep Purple "Smoke on the Water" riff tone on a Roland Cube 30, select the BRIT COMBO preset, then set Gain 6, Bass 5, Mid 7, Treble 7, Lead gain 6, Lead volume 7. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-10-24

Preset / mode
BRIT COMBO
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Roland Cube 30 knobs

Gain
6
Bass
5
Mid
7
Treble
7
Lead gain
6
Lead volume
7
Delay reverb
0
Efx selector
0
Select switch
1
Jc clean volume
5
Lead type switch
2

Playing tips

  • Focus on a tight picking attack to enhance the percussive quality of the riff.
  • Use palm muting on the lower strings to add punch and clarity.
  • Experiment with dynamics; play softer for the verses and harder for the chorus.

The original rig

What Deep Purple used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 30 actually has.

Guitar
1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups)
Amp
Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version)
Gain
6
Bass
6
Mid
7
Treble
7
Presence
6.5
Reverb
0.5
Full Smoke on the Water tone breakdown, effects and sources →

Different guitar or pedals? Get Smoke on the Water adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Deep Purple's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Roland Cube 30 for Smoke on the Water?

Start from the BRIT COMBO preset, then set Gain 6, Bass 5, Mid 7, Treble 7, Lead gain 6, Lead volume 7.

Which pickup should I use for Smoke on the Water?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Deep Purple use on Smoke on the Water?

Guitar: 1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups). Amp: Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 30

All 13 songs for the Roland Cube 30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.