ToneAdapt

Loading...

Roland Cube 30 settings

Walk settings for Roland Cube 30

Pantera · adapted 8 times on ToneAdapt

To get the Pantera "Walk" riff tone on a Roland Cube 30, select the METAL STACK preset, then set Gain 8.5, Bass 6, Mid 3.5, Treble 7.5, Reverb 0, Lead gain 8.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Dean ML 79 Floyd · updated 2026-09-24

Preset / mode
METAL STACK
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Roland Cube 30 knobs

Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Reverb
0
Lead gain
8.5
Lead volume
7
Delay reverb
0
Efx selector
0
Select switch
1
Jc clean volume
5
Lead type switch
5

Playing tips

  • Use tight palm muting for chugging riffs.
  • Focus on a sharp pick attack to enhance clarity.
  • Maintain a consistent rhythm to achieve a tight sound.

The original rig

What Pantera used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 30 actually has.

Guitar
Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power)
Amp
Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers)
Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Presence
7
Reverb
0
Full Walk tone breakdown, effects and sources →

Different guitar or pedals? Get Walk adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pantera's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Roland Cube 30 for Walk?

Start from the METAL STACK preset, then set Gain 8.5, Bass 6, Mid 3.5, Treble 7.5, Reverb 0, Lead gain 8.5.

Which pickup should I use for Walk?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pantera use on Walk?

Guitar: Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power). Amp: Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers).

Will these settings work with my guitar?

These settings were adapted for a Dean ML 79 Floyd. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 30

All 13 songs for the Roland Cube 30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.